|
| |
Data Communications
Real-time,
mission-critical systems demand fast and reliable movement of information
between various elements of an interconnected system. Curtiss-Wright Controls
Embedded Computing offers high-speed data communications and I/O products that
will meet your program requirements.
Use the left-hand navigation menu to browse through our data communication
products, or review the index below and click on the product name for more
information.
Curtiss-Wright offers a number of products that provide high-speed, low latency
communications.
FibreXtreme® Serial FPDP
products provide up to 247Mb/sec data throughput, 99% bandwidth utilization, and
the simplicity and reliability essential for many of today's demanding
sensor-to-DSP applications. With FibreXtreme, data transfers occur without the
CPU overhead and non-deterministic latencies associated with many layers of
complex software protocols.
SCRAMNet® shared-memory products are optimized for the high-speed, ultra-low
latency transfer of data among many computing platforms that are all solving
portions of the same real-time problem. Its simplicity and speed are ideally
suited for applications requiring a high degree of synchronization and control.
The next-generation SCRAMNetGT product line can accommodate network control
functions and network data streams seamlessly and simultaneously.
FX400 Fibre Channel products maximize the superior communication and
interconnect capabilities of ANSI standard Fibre Channel. Combining the delivery
and repeatability of a channel with the connectivity and protocol multiplexing
of a network, Fibre Channel delivers the high-speed data transfers and
interconnect versatility required in applications such as storage area networks,
avionics databus and image processing systems.
Fibre Channel
|
Product |
Form-
Factor |
Interface
type and number |
Speed |
Operating
System/
Protocol
Support |
Ruggedization |
Other |
|
PMC-643 |
PMC |
2 Fibre Channel |
2.125 Gbps |
VxWorks
VI/IP/SCSI |
AC 0,100
CC 100,200 |
Onboard hub.
Supports copper interface through backplane connectors |
| FX400 Fibre Channel |
PCI |
1 or 2 Fibre Channel |
4.25 Gbps 400MB/s throughput |
Linux, VxWorks FS, IP, RI Windows
FS |
AC 0 |
266 MHz PCIX, multi-protocol
driver |
|
FX400 Fibre
Channel |
PCIe |
2 Fibre Channel |
4.25 Gbps
400MB/s throughput |
Linux, VxWorks
FS, IP, RI Windows FS |
AC 0 |
PCIe x 4,
multi-protocol driver. |
| FX400 Fibre Channel |
PMC |
1 or 2 Fibre Channel |
4.25 Gbps 400MB/s throughput |
Linux, VxWorks FS, IP, RI Windows
FS |
AC 0 |
133 MHz PCIX, multi-protocol
driver |
FireWire
|
PFIR |
PMC |
2 IEEE 1394 ports |
400 Mbps |
Linux, VxWorks |
AC 0, 100
CC 100, 200 |
Standard 6-wire cable for
plug-and-play, hot-swap convenience |
Serial FPDP
|
FibreXtreme
SL100 Multi Channel |
PCI |
PCIe x8 Serial FPDP
(Note 1) |
1.0625 Gbps 105MB/s
throughput per channel |
Linux, Windows |
AC 0 |
Extends FPDP up to 50km |
|
FibreXtreme SL100
Dual Channel |
PCI |
PCI-X Serial FPDP
(Note 1) |
1.0625 Gbps 105MB/s
throughput per channel |
IRIX, Linux, Solaris,
VxWorks, Windows |
AC 0 |
Extends FPDP up to 50km |
|
FibreXtreme
SL100 Dual Channel |
PMC |
PCI-X Serial FPDP
(Note 1) |
1.0625 Gbps 105MB/s
throughput per channel |
IRIX, Linux, Solaris,
VxWorks, Windows |
AC 0, 100, CC 200 (Note
5) |
Extends FPDP up to 50km |
|
FibreXtreme SL100 |
PMC |
Serial FPDP (Note 1) |
1.0625 Gbps 105MB/s throughput |
Linux, Solaris, VxWorks |
AC 0, 100
CC 200
(Note 5) |
Extends FPDP up to 50km |
|
FibreXtreme SL100 |
PCI |
Serial FPDP (Note 1) |
1.0625 Gbps 105MB/s throughput |
IRIX, Linux, Solaris, VxWorks,
Windows |
AC 0 |
Extends FPDP up to 50km |
|
FibreXtreme SL100 |
CMC (Note 2) |
Serial FPDP (Note 1) |
1.0625 Gbps 105MB/s throughput |
-
|
AC 0, 100 |
Extends FPDP up to 50km;
several carrier options available - VME and PCI (Note 6) |
|
FibreXtreme
SL240 Multi Channel |
PCI |
PCIe x8
Serial FPDP(Note
1) |
2.5 Gbps 247MB/s
throughput per channel |
Linux, Windows |
AC 0 |
Extends FPDP up to 50km |
|
FibreXtreme SL240
Dual Channel |
PCI |
PCI-X
Serial FPDP(Note
1) |
2.5 Gbps 247MB/s
throughput per channel |
IRIX, Linux, Solaris, VxWorks |
AC 0 |
Extends FPDP up to 50km |
|
FibreXtreme SL240 Dual Channel |
PMC |
PCI-X
Serial-FPDP(Note 1) |
2.5 Gbps
247MB/s throughput per channel |
Linux, Solaris, VxWorks |
AC 0, 100
CC 200 (Note 5) |
Extends FPDP
up to 50km |
|
FibreXtreme SL240 |
PMC |
Serial FPDP (Note 1) |
2.5 Gbps 247MB/s throughput |
Linux, Solaris, VxWorks |
AC 0, 100
CC 200 (Note 5) |
Extends FPDP up to 50km |
|
FibreXtreme SL240 |
PCI |
Serial FPDP (Note 1) |
2.5 Gbps 247MB/s throughput |
IRIX, Linux, Solaris, VxWorks,
Windows |
AC 0 |
Extends FPDP up to 50km |
|
FibreXtreme SL240 |
CMC (Note 2) |
Serial FPDP
(Note 1) |
2.5
Gbps
247
MB/s
throughput |
- |
AC
0, 100
(Note 5,6) |
Extends FPDP
up to 50Km; VME & PCI carrier options. |
Shared Memory
SCRAMNet+
SC150e |
PCI |
Shared Memory (Note 3) |
150 Mbps 16.7 MB/s throughput |
HP UX, Windows, Linux (Red Hat
& SuSE) QNX, IRIX, Solaris |
AC 0 |
250nsec latency |
SCRAMNet+
SC150e |
cPCI |
Shared Memory |
150 Mbps (Note 3) |
HP UX, Windows, Linux 16.7MB/s
throughput IRIX, Solaris |
AC 0
(Red Hat & SuSE) QNX |
250nsec latency |
SCRAMNet+
SC150e |
PMC |
Shared Memory (Note 3) |
150Mbps 16.7MB/s throughput |
VxWorks, QNX, Solaris, Yellow
Dog Linux |
AC 0 |
250nsec latency |
SCRAMNet+
SC150 |
VME |
Shared Memory (Note 3) |
150 Mbps 16.7MB/s throughput |
VxWorks, IRIX |
AC 0 |
250nsec latency |
SCRAMNet+
SC150 |
3.3" x 4.0" |
Shared Memory (Note 3) |
150 Mbps 16.7MB/s throughput |
|
AC 0 |
Mezzanine for rehosting onto
custom carrier |
SCRAMNetGT
GT200 |
PCI |
Shared Memory (Note 4) |
2.5 Gbps 200MB/s throughput |
Windows, IRIX, Linux, Solaris |
AC 0 |
Memory options starting at
128MB |
SCRAMNetGT
GT200 |
PMC |
Shared Memory (Note 4) |
2.5 Gbps 200MB/s throughput |
VxWorks, Solaris |
AC 0 |
Memory options starting at
128MB |
Notes
1. FibreXtreme Serial FPDP products are available with copper or
800nm/1300nm/1550nm optical transceivers.
2. The CMC format provides a 32-bit parallel interface for conversion to Serial
FPDP. FibreXtreme CMC cards can be mounted
on companion VME or PCI carrier boards, or used with a custom carrier.
3. SCRAMNet+ is a ring topology shared memory network, available in copper,
standard fiber (300M) or extended fiber
(3000M) media. Reconfigurable networks can be constructed with use of the
optional LinkXchange crossbar switch.
4. SCRAMNetGT is a ring topology shared memory network operating at 2.5Gbps,
available in standard fiber (300M) or extended
fiber (3000M) media. Reconfigurable networks can be constructed with use of
the optional LinkXchange crossbar switch.
5. Available in -10°C to 70°C air-cooled configuration.
6. Available in -10°C to 70°C and -40°C to 85°C air-cooled configurations.
Communications Software
Curtiss-Wright
Controls Embedded Computing supports manyindustry-standard communications
protocols to operate over the wide variety of hardware interfaces we
provide. These software components are delivered as part of an RTOS board
support package, or in separately available libraries. The following
protocols are supported:
TCP/IP over 10/100 BASE-T/TX and 1000 BASE-T/TX (Gigabit Ethernet)
HDLC/SDLC synchronous and asynchronous serial I/O
MIL-STD-1553A and MIL-STD-1553B
ARINC-429
Fibre Channel FXRI, VI, TCP/IP and SCSI
Serial FPDP
CANbus
StarFabric
High performance inter-processor communications |
Avionics/Vehicle Bus &
Serial I/O Communications Products
Curtiss-Wright Controls
Embedded Computing offers communications products to interface with standard
network and serial interfaces used in avionics and vehicle systems including
MIL-STD-1553A/B, ARINC-429 and CANbus. MIL-STD-1553 products are supported with
a full-featured source-included software driver that accommodates the many
operational modes encountered in 1553 systems.
|
PMC-211 |
PMC |
2 CANbus |
250/500,
1000Kbps |
VxWorks |
AC 0, 100
CC 200 |
Optional US Army Utility
bus |
|
PMC-601 |
PMC |
2 MIL-STD-1553
16 TTL I/O
|
1 Mbps
|
INTEGRITY
VxWorks
Linux
|
AC 0, 100
CC 100, 200
|
Single and dual channel
|
|
P15D |
PMC |
2 MIL-STD-1553 |
|
VxWorks
Linux
|
AC 0, 100
CC 100, 200
|
Two independent,
dual-redundant 1553 databus interfaces |
|
PARD |
PMC |
ARINC-429/575
(4 Tx, 8 Rx) |
100 Kbps |
VxWorks
Linux
|
AC 0, 100
CC 100, 200
|
Ouput of each channel can be
independently placed in Tri-state mode |
|
1553 Gold+ |
PC-AT |
2 MIL-STD-1553 |
1 Mbps |
Windows |
AC 0 |
Single & multi-mode versions |
|
1553 Gold+ |
PCI |
2 MIL-STD-1553 |
1 Mbps |
Windows, Linux, Solaris |
AC 0 |
Single & multi-mode versions |
|
1553 Gold+ |
cPCI |
1 MIL-STD-1553 |
1 Mbps |
Windows, Linux, Solaris |
AC 0 |
Single & multi-mode versions |
|
1553 Gold+ |
PMC |
1 MIL-STD-1553 |
1 Mbps |
Windows, Linux, Solaris, VxWorks |
AC 0 |
Single & multi-mode versions |
|
1553 Gold+ |
VME |
2 MIL-STD-1553 |
1 Mbps |
Unix, SunOS, Solaris |
AC 0 |
Single & multi-mode versions |
|
1553 Gold+ |
VXI |
2 MIL-STD-1553 |
1 Mbps |
Unix, Windows |
AC 0 |
Single & multi-mode versions |
|
1553 Gold |
BIU Express VME |
1 MIL-STD-1553 |
1 Mbps |
Unix |
AC 0 |
Single mode |
Industry Pack I/O Products
Curtiss-Wright Controls
Embedded Computing offers products I/O solutions based on the popular
IndustryPack standard. IndustryPack I/O modules can be mounted on a variety of
carriers to fit VME, PCI and CompactPCI systems.
|
IP4-206 |
Opto-isolated digital
I/O 16 input/outputs or 24 inputs |
VxWorks |
AC 0, 100
CC 100, 200 |
MIL-STD-704, MIL-STD-
1275 compliant input/output |
| IP4-660 |
Analog input, 16
single-ended or 8 differential |
VxWorks |
AC 0, 100
CC 100, 200 |
16-bit resolution 10V,
5V, +10V, +5V ranges |
| IP4-661 |
Analog output 3 outputs |
VxWorks |
AC 0, 100
CC 100, 200 |
16-bit resolution 10V,
5V, +10V, +5V ranges |
|
ADC128F1 |
Analog input 8 channel |
OS-9, Windows |
AC 0 |
12-bit resolution, 10V
range |
|
ADM1224F |
Analog input 24 channel |
OS-9, Windows |
AC 0 |
Triple ADC converter,
multiplexed differential inputs |
| DAC128V |
Analog output 8 channels |
OS-9, Windows |
AC 0 |
12-bit resolution, 8 voltage ranges |
| DIO316I |
Digital I/O 16 inputs 16 outputs 16 I/O |
OS-9, Windows |
AC 0 |
Interrupt on input change |
| TRIDO48 |
Digital output 48 channels |
OS-9, Windows |
AC 0 |
Tristatable ouputs |
| OPTDO32 |
Opto-isolated digital output 32 channels |
OS-9 |
AC 0 |
3000V isolation, open collector with
pull-ups |
| DID48 |
Digital input 48 channel |
OS-9, Windows |
AC 0 |
Hardware de-bounced inputs, interrupt on
change |
| LOW40 |
High power driver 40 channel |
OS-9, Windows |
AC 0 |
Low side open collector outputs,
transient protected |
| RELAY16 |
Relays 16 Form C |
OS-9, Windows |
AC 0 |
1A relays, integrated transient
suppression |
| REED25 |
Relays 25 Reed |
OS-9, Windows |
AC 0 |
Magnetically shielded relays for EMI
sensitive applications |
| COMM232 |
Serial I/O 4 EIA-232 ports |
OS-9 |
AC 0 |
Full handshaking signals |
| DUAL32CT |
Counter/Timer dual 32-bit |
OS-9, Windows |
AC 0 |
Clock generation, watchdog timers,
variable period/duty cycle generation |
Industry Pack Carrier Cards
| SVME/DMV-209 |
VME |
4 |
AC 0, 100
CC 100, 200 |
Rear panel I/O, onboard 15V PSU |
| VMESC5 |
VME |
5 |
AC 0 |
Up to 250 I/O points per slot |
| ISASC6 |
ISA |
6 |
AC 0 |
Up to 200 I/O points per slot |
| PCISC3 |
PCI |
3 |
AC 0 |
Up to 150 I/O points per slot |
| PCISC5 |
PCI |
5 |
AC 0 |
Up to 250 I/O points per slot |
| CPCISC4 |
cPCI |
4 |
AC 0 |
Up to 200 I/O points per slot |
| |
 GCH News
feeds
Product versions
Latest Versions
in HTML
|
